The Myth of Monatomic Colloidal Silver
While there are many forum members (especially on the colloidal silver forums) that are actually representatives of low grade manufacturers of colloidal silver, it must be understood that they are there to strategically protect and represent certain “Friends”, but they go out of their way to try to discredit anyone that has a better product.
These same writers deny that existence of monatomic atoms, while in fact the Hadron Collider has determined their existence, so who is misleading who?
This is what they write at Curezone with my rebuttal to their claims:
“The Myth of Monatomic Colloidal Silver
Monatomic colloidal silver is claimed to be colloidal silver that consists of particles that are single atoms of silver suspended in water. It is further claimed that because the silver particles are so small these products do not exhibit a Tyndall effect and the result is a product that is as clear as water.
The Problem with Monatomic Colloidal Silver
One of the forces in nature is the Van der Waal's force of mutual attraction which is an attractive force exerted between similar atoms and molecules. This force causes identical atoms in close proximity to each other to be drawn together to form a cluster of atoms. Such a cluster of silver atoms is called a silver particle. When the distance separating individual atoms is within a few atomic diameters, the force of mutual attraction that would cause the atoms to be drawn together can exceed 100,000 G-forces. At the atomic level there exists no counter force to prevent the atoms from coming together in a process called aggregation.”
My comments on the above:
AGGREGATION means: the condition of being so collected
“It is the Van der Waal's force of mutual attraction that prevents the existence of colloids whose particles are single atoms. The probability of the existence of monatomic colloids is virtually zero. This statement applies to the claims for monatomic colloids of other metals as well, such as gold, copper, zinc, platinum, palladium, rhodium, etc. Another Name for Ionic Silver Without exception, laboratory analysis of products claiming to be monatomic colloids have shown that they are in fact ionic solutions. Products claimed to be monatomic colloidal silver are ionic silver solutions, just as products claimed to be monatomic Colloidal Gold are ionic gold solutions and so forth.”
While attacking products that they deny that exist, or much less understand, they do not offer any proof to sustain ANY previous laboratory analysis that has been done since the Hadron Collider has proven them wrong. Instead they continue with misinformation and continue to mislabel Silver Atoms as an Ionic product, yes Ionic products do exist, and yes many are made with chemicals, however Colloidal Silver Atoms and gold products meet and exceed all expectations of being a Colloid and not Ionic.
“Because hundreds of ionic silver products are on the market, how does one product distinguish itself from another? In the business of colloidal silver the answer seems to be the use of technical sounding terms which are not really technical or scientific but sound like they are to the non-technical reader. Monatomic colloidal silver is one such a term. This term is typically explained in impressive sounding detail on the web sites that promote monatomic silver products. This is a marketing term used to hide the truth that what is being sold is an ionic silver solution just like hundreds of others. Virtually all ads for monatomic colloidal silver describe the product as appearing to be clear as water. This is one of the distinguishing characteristics of ionic silver. Here for more details on ionic silver.”
The writer of the above statement says: “Because hundreds of ionic silver products are on the market, how does one product distinguish itself from another?”
That’s a good question that deserves a good answer and here it is:
To distinguish good colloids from bad colloids you have look for the obvious:
1. Color, if it has color it has chemicals that is unquestionably proof of chemical content
2. Low PPM 8-500 PPM, means LOW Grade Products
3. Particle Size if they are nanoparticles you can expect to have 3500 to 250,000 atoms per particle which are HUGE, if its a nanoparticle product, they will have a Tyndall Effect, because of the chemicals and particles mass.
There is more silver in normal tap water than in some of their expensive chemical colloids,
Colloidal Silver and Noble Metal Atoms do not reflect light.
The conduction electrons in any atomic size metal will start to vibrate longitudinally as a response to the incident EM-radiation i.e. the electrons will move and agitate back and forth, as a reaction to the incident oscillating electrical field. It is this oscillation of conduction electrons that gives rise to the phase shifted reflected light of a conductor. The plasma frequency is that frequency above which the electrons can no longer follow the oscillating incident E-field. This somewhat means that the E field is vibrating much too fast and the electrons will not respond anymore to that motion. If this happens, the E field and the light as well will no longer be reflected but it will pass through the medium.“The Reality of Monatomic Silver
Monatomic silver cannot actually exist for the reasons described above. Products advertised as monatomic colloidal silver are actually ionic silver solutions. Not all, but many such products have also been found to contain fairly high concentrations of NO3 which means they contain either nitric acid or nitrates. High concentrations of NO3 are present in some products as a by product of the method used to produce them. Neither nitric acid and nitrates are substance you should not be ingesting into your body or applying topically. The lab analysis page shows the NO3 concentration in parts-per-million (ppm) for products which contain NO3.”
This is the kind of science that would deny that the earth is round. The reason for the creation of the Hadron Collider is to confirm the existence of hidden matter, to confirm the existence of individual atoms, monatomic particles and to find the elusive God Particle in which all of the above have been confirmed.
The FDA has published an article explaining that many Colloidal Silver Producers us:
- Sodium
- Hydrogen Peroxide
- Nitric Acid
- Hydrochloric Acid
- Phosphates
- Cyanide
- Sulfuric Acid
- Chlorides
- Bromides (aka Silver Protein)
- Sodium combined with Silver, make Silver Chloride, all chlorides cause nerve damage over long term use.
- Hydrogen Peroxide combined with Silver creates a solution that contributes to premature graying of the hair.
- Hydrochloric acid combined with silver makes Silver Hydroxide that causes the hair to fall out.
While the writer attacks ionic silver as being NO3 made, they themselves do not state what chemicals they use to make their horrific looking colloids. And if they do not reveal that on their label you have to ask yourself why, what are they trying to hide?
Colloidal Silver Atoms DEFY All Conventional Nanoparticle Standards of measurements because they are NOT Nanoparticles, Nanoparticle will exhibit a Tyndall effect because they are 3500 atoms to 250,000 times larger, then when they mix in all the chemical soup that they use to make them, of course your are going to have a Tyndall Effect. But are they good for you? NOT HARDLY.
Nanoparticle Colloidal Silver makers worship the Tyndall effect. They think that its proof of Silver in the solution but they are in error, what they are seeing is mostly chemicals and very, and I repeat very few silver particles, so few that in fact you get almost the same the silver in regular tap water than their products, which is no wonder why they do not work.
The author of the above post fails to explain where they base that information from, why? Simple they want you to understand “part of the information” they do not mention the fact that the people that wrote that are: Francis S. Kelly and George Maass PhD wrote an article: Ions, Atoms and Charged Particles, you can read their article here:
www.silver-colloids.com/Papers/IonsAtoms&ChargedParticles.PDF
While most of the writing tries is meant bash the Colloidal Silver Ions, they freely admit that Colloidal Silver Atoms are possible, in the area where it is labeled “Silver Atoms”.
For instance Francis S. Kelly and George Maass PhD wrote an article: Ions, Atoms and Charged Particles, while its very informative their report is done to “protect special interests”.In an interesting paragraph they wrote:
“Silver atoms
Notice the word "In Practice" all they mean is that in THEIR PRACTICE of Colloidal Silver production.
They freely admit that there are no instruments that can measure under 1 nanometer. Therefore they cannot scientifically explain why colloidal silver atoms are not a colloid or colloidal especially when the Hadron Collider has proven them wrong. Because an atom is too small, it is too small to be measured by conventional instruments.
Furthermore, Atoms cannot exhibit the Tyndall’s effect because they are less than one nanometer in size, and atoms do not, and cannot exhibit color.
So what is a Monatomic Particle?
It is an atom that has the opposite spin of a normal atom, meaning while one atom may be rotating to the right, a monatomic particle would spin to the left, have some very interesting effects that are opposite of a normal atom.
How to do a destructive test to prove silver atom content:
Real simple and its basic chemistry
Warning: Children do not try this experiment without adult supervision, certain chemicals can be hazardous to your health, this test should only be conducted by experienced chemists, proper safety equipment and supplies are required, if you do this experiment you do so at your own risk.
- Take 500 ml of Monatomic Colloidal Gold Atoms from:
- http://www.gold2live.com/Atoms-vs-Nanoparticles.html
- (Trace Gold 15000 PPM in Distilled water)
- Add 1 tablespoon of PURE Salt.
- Boil down to about 20 ml, until is moist salt, do not over heat.
- Add 500 ml Water and repeat step 3 This time boil down to about 200 ml
- Add 500 ml of HCL (Hydrochloric Acid) and boil down to moist salt
- Add 500 ml of pure distilled water and boil down to moist salt
- Repeat 4 times until there is no HCL smell and no gold chloride color.
- Upon the last boil down, there will be found pink or reddish precipitate mixed in with the salt which when fired in extreme heat produced gold beads which also tested for gold.
Do this test to see if you have chemicals in your LOW Grade Colloidal Silver which is 8-500 PPM:
A simple refrigerator test will reveal if your colloidal silver or colloidal gold has chemicals:
3. You can do both, place it in high heat conditions, refrigerate it for a few days then watch how the chemical content drops to the bottom of the glass vessel.
Colloidal Silver Atom, or Gold or any other noble metal product are the MOST Perfect Products on the market, because of the ZERO chemicals, High GRADE Colloidal Atom size particles, and Highest PPM in the industry which means to you more value for your dollars, and faster health recovery.
Given the fact that the Hadron Collider will be responsible for re-writing physics, it would be best for the writiers of Ions, Atoms and Charged Particles article, to remove it from the public domain.
No comments:
Post a Comment